2K型特康斯特封-Turcon stepseal 2K
The single-acting seal element is made of high-grade
Turcon or Zurcon materials with outstanding sliding
and wear resistance properties. It is installed according to
ISO 7425/2 and Trelleborg Sealing Solutions standard
grooves, using an O—Ring as the energizing element
TURCON STEPSEAL 2K
- Single-Acting -
- O—Ring-Energized Turcon Slipper Seal
Advantages
- High static and dynamic sealing effect
- Stick-slip-free operation for precise control
- High abrasion resistance and high resistance to extrusion
- Long service life
- Simple groove design, one-piece piston possible
- Wide range of application temperatures and high
resistance to chemicals, depending on the choice of
O—Ring material
- Simple installation without seal edge deformation
- Available for all diameters up to 106 inches (2,700 mm)
- Low friction
application engineers for assistance! Patented and patent pending geometry
Application Examples
The Turcon Stepseal 2K is the recommended sealing
element for single-acting pistons in hydraulic components
for:
- Injection molding machines
- Machine tools
- Presses
It is particularly recommended in floating piston
accumulators as the primary seal on the oil side in
combination with AQ-Seal® and AQ-Seal 5.
Materials
Standard Application:
- For hydraulic components in mineral oils containing zinc
or medium with good lubricating performance
Seal ring: Turcon T46
Energizer: O—Ring NBR 70 Shore A or FKM 70
Shore A depending on the
temperature
Set reference: T46N or T46V
