特康泛塞密封件M2S型-Turcon Variseal M2S
Walle sealing Variseal M2S is a single acting seal consisting of a U-shaped jacket and a V-shaped corrosion resistant spring.
Variseal M2S has an asymmetric seal profile. The heavy profile of its dynamic lip is optimized, offering long service life and a good scraping ability even in media with high viscosity.
Advantages
- Suitable for reciprocating and rotary movement
- Excellent scraping ability
- High abrasion resistance
- Dimensionally stable
- Resistant to most fluids and chemicals
- Safe for contact with food and pharmaceuticals
- Excellent resistance to ageing
- Can be sterilized
- Available in Hi-Clean version
- Interchangeable with O-Ring and Back-up Ring combinations to MIL - G - 5514F and ISO 6194
Technical Data
Operating
pressure: Maximum dynamic load: 45 MPa
(450 bar, 6527 psi)
Maximum static load: 60 MPa
(600 bar, 8702 psi)
Speed: Reciprocating up to 10 m/s (33 ft/sec)
Rotating up to 0.5 m/s (1.6 ft/sec)
Operating
temperature: -70 °C (-94 °F) up to
+260 °C (+500 °F)
Special TurconR and ZurconR
materials as well alternative spring
materials are available for
applications outside this temperature
range.
Media
compatibility: Fluids of medium to high viscosity or containing hard particles.
Note: At high temperatures operating
pressures and speeds are lower.
Standard Materials
Jacket: Material code T40
Spring material: Spring code S (stainless steel),
Material No. 1.4310 (AISI 301)
Areas of Application
- Hydraulic components with highly viscous media
- Food processing, for example bottling plants for dairy and food products
- Pharmaceutical and chemical industries
- Processing of sealing compounds, adhesives, pastes
- Media with particle ingress
